UL PRODUCT CATEGORY

[Swimming Pool and Spa Equipment] Potting Compounds, WCRY


See General Information for Swimming Pool and Spa Equipment

680.23(B)(2)(b)680.27(A)(2)680.52(B)(2)680.52(B)680.56(C)680.23(B)(2)(B)680.27(A)(2)680.52(B)(2)680.52(B)680.56(C)

USE

This category covers compounds intended to be used to encapsulate grounding and bonding conductor splices or terminations in swimming pool, spa or fountain equipment such as fixtures, fixture housings, and junction boxes where the splices or terminations may be exposed to salt-free swimming pool or fountain water and sunlight for varying lengths of time, including continuous exposure. This category also covers potting compounds used to fill underwater junction boxes.

These compounds have been investigated for their resistance to the deteriorating effects of salt-free swimming pool and fountain water and ultraviolet light. They have also been investigated for their ability to adhere to typical metals, such as copper alloy, stainless steel and to plastic. The container or package is marked to identify the materials to which the compound has been determined to suitably adhere.

PRODUCT IDENTITY

One of the following product identities appears on the product:

    Fountain and Spa Equipment Conductor Splice Potting Compound

    Fountain Equipment Conductor Splice Potting Compound

    Spa Equipment Conductor Splice Potting Compound

    Swimming Pool and Fountain Equipment Conductor Splice Potting Compound

    Swimming Pool and Spa Equipment Conductor Splice Potting Compound

    Swimming Pool Equipment Conductor Splice Potting Compound

    Swimming Pool, Fountain and Spa Equipment Conductor Splice Potting Compound

ADDITIONAL INFORMATION

For additional information, see Electrical Equipment for Use in Ordinary Locations (AALZ) and Plumbing and Associated Products (AAPP).

REQUIREMENTS

The basic requirements used to investigate products in this category are contained in UL Subject 676A, "Outline of Investigation for Potting Compounds for Swimming Pool, Fountain, and Spa Equipment."

UL MARK

The Certification Mark of UL on the smallest unit container in which the product is packaged is the only method provided by UL to identify products manufactured under its Certification and Follow-Up Service. The Certification Mark for these products includes the UL symbol, the words "CERTIFIED" and "SAFETY," the geographic identifier(s), and a file number.

Alternate UL Mark

The Listing Mark of UL on the smallest unit container in which the product is packaged is the only method provided by UL to identify products manufactured under its Listing and Follow-Up Service. The Listing Mark for these products includes the UL symbol (as illustrated in the Introduction of this Directory) together with the word "LISTED," a control number, and the product name "Swimming Pool, Fountain and Spa Equipment Conductor Splice Potting Compound" (any of the locations may be omitted).

* * * * * * * * * * * * * * * * * * * * * * * * *

UL, in performing its functions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any other party. UL shall not incur any obligation or liability for any loss, expense or damages, including incidental or consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon this Guide Information.

Fountain Equipment Conductor Splice Potting CompoundsSpa Equipment Conductor Splice Potting CompoundsSwimming Pool Equipment Conductor Splice Potting Compounds
Last Updated on 2013-05-16
WCRY.GuideInfo WCRY ACTIVE 20130516 19980716

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2019 UL LLC".