UL PRODUCT CATEGORY

Roof Deck Fasteners


See General Information for Roof Deck Fasteners

BUILDING PRODUCTS DEVELOPMENT INCR22301
1100 E MAIN ST
PO BOX 298
LOGANSPORT, IN 46947-0298 USA

Panel clip fasteners identified as "NCF-33000", "NCF-33001", "NCF-33005", "NCF-33006", "NCF-33007", "NCF-33015", "NCF-33016", "NCF-33000-SS", "NCF-33001-SS", "NCF-33005-SS", "NCF-33006-SS", "NCF-33007-SS", "NCF-33015-SS" and "NCF-33016-SS" for use in Construction Nos. 90, 180, 238, 238A, 238B, 298, 298A, 437, 482, 449, 451, 452, 487 and 684.

Panel clip fasteners identified as "NC33001", "NC33002", "NC33003", "NC33004", "NC33007", "NC33008", "NC33009", "NC33010", "NC33201", "NC33202", "NC33203", "NC33204" for use in Construction Nos. 90, 180, 238, 238A, 238B, 298, 437, 482, 449, 451, 452, 487 and 684.

Panel clip fasteners identified as "NC34503" and "NC34504" for use in Construction Nos. 180B, 205, 205A, 286, 308B, 358, 534, 535, 536, 537 and 541.

Panel clip fasteners identified as "NC34506" and "NC34507" for use in Construction Nos. 177 and 227.

Panel clip fasteners identified as "NC34501", "NC34502", "NC34701" and "NC34702" for use in Construction Nos. 180C, 287, 308A, 450, 538, 539, and 540.

Panel clip fasteners identified as "NC34508", "NC34509", "NC34510", "NC34511" for use in Construction Nos. 197 and 197A.

Panel clip fasteners identified as "NC34512", "NC34513", "NC34514", "FC451", "FC452" and "FC453" for use in Construction No. 240.

Last Updated on 2014-07-18
TLSX.R22301 R22301 TLSX 100028941 LISTING Active 20140718 20140718

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2019 UL LLC".