UL PRODUCT CATEGORY

Metal Roof Deck Panels


See General Information for Metal Roof Deck Panels

WHIRLWIND STEEL BUILDINGS INCR8210
8234 HANSEN RD
HOUSTON, TX 77075-1002 USA

Coated steel panels identified as "Super Span" (X) for use in Construction Nos. 30, 79, 161, 167.

Coated steel panels identified as "Lo-Rib" for use in Construction No. 39.

Coated steel panels identified as "Super Seam-24" panels for use in Construction No. 240.

Coated steel panels identified as "Weather Lok-16" panels for use in Construction Nos. 506, 506A, 506B .

Coated steel panels identified as "Super Seam-II" panels for use in Construction Nos. 180B, 205, 205A, 286, 308B, 534, 535, 536, 537, 541.

Coated steel panels identified as "Super Seam-Plus" panels for use in Construction Nos. 180C, 287, 308A, 450, 538, 539, 540.

Coated steel panels identified as "Weather Snap-12" or "Weather Snap-16" panels for use in Construction Nos. 254, 255, 261, 303, 342, 343, 414, 436, 445, 446, 447, 448, 486, 508A, 543, 544.

Coated steel panels identified as "Sturdi-Rib" for use in Construction No. 560.

Coated steel panels identified as "Sturdi-Span" for use in Construction No. 561.

Coated steel panels identified as "Weather-Guard" for use in Construction No. 529.

Coated steel panels identified as "7.2 Rib" for use in Construction No. 244.

Coated steel panel identified as "Stor-Lok 16" for use in Construction Nos. 170, 586, 586A, 609.

Last Updated on 2008-01-22
TJPV.R8210 R8210 TJPV 160466001 LISTING Active 20080122 20080122

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2019 UL LLC".