UL PRODUCT CATEGORY

[Roof Deck Constructions] (Roof Deck Construction Materials) Foamed Plastic, TJBX


See General Information for Roof Deck Construction Materials

719.51508.126032603.32603.4.1.52603.6

GENERAL

This category covers foamed plastic material intended for use in roof deck constructions. The applicable Construction Numbers for these materials are indicated in the individual certifications.

Authorities Having Jurisdiction should be consulted before installation.

Where indicated in the individual certifications, products covered under this category have also been evaluated by ICC Evaluation Service (ICC-ES).

FACTORS NOT INVESTIGATED

Properties of the materials other than their capacity to contribute to the spread of flame on the underside of the construction and/or their uplift resistance have not been investigated.

PRODUCT IDENTITY

The following product identity appears on the product:

    Foamed Plastic

RELATED PRODUCTS

For the surface-burning characteristics of foamed plastics, see Foamed Plastic (BRYX).

ADDITIONAL INFORMATION

For additional information, see Roof Deck Constructions (TGKX) and Roofing Materials and Systems (AARM).

REQUIREMENTS

The basic standards used to investigate products in this category are ANSI/UL 580, "Tests for Uplift Resistance of Roof Assemblies," and ANSI/UL 1256, "Fire Tests of Roof Deck Constructions."

UL MARK

The Certification Mark of UL on the product is the only method provided by UL to identify products manufactured under its Certification and Follow-Up Service. The Certification Mark for these products includes the UL symbol, the words "CERTIFIED" and "SAFETY," the geographic identifier(s), and a file number.

Additional Certification Markings

Products covered under this category are additionally marked with the following information:

AS ROOF DECK CONSTRUCTION MATERIAL
WITH RESISTANCE TO INTERNAL FIRE EXPOSURE
FOR USE IN CONSTRUCTION NO(S). ____
SEE UL ONLINE CERTIFICATIONS DIRECTORY

or

AS ROOF DECK CONSTRUCTION MATERIAL
AS TO UPLIFT RESISTANCE
CLASS +
AS SHOWN BY CONSTRUCTION NO(S). ____
SEE UL ONLINE CERTIFICATIONS DIRECTORY
+ 15, 30, 60 or 90

Alternate UL Mark

The Classification Mark of UL on the product is the only method provided by UL to identify products manufactured under its Classification and Follow-Up Service. The Classification Mark for these products includes the UL symbol, the word "CLASSIFIED" above the UL symbol (as illustrated in the Introduction of this Directory), and the following additional information:

FOAMED PLASTIC
AS ROOF DECK CONSTRUCTION MATERIAL
WITH RESISTANCE TO INTERNAL FIRE EXPOSURE
FOR USE IN CONSTRUCTION NO(S). ____
SEE UL ROOFING MATERIALS AND SYSTEMS DIRECTORY
Control No.

or

FOAMED PLASTIC
AS ROOF DECK CONSTRUCTION MATERIAL
AS TO UPLIFT RESISTANCE
CLASS +
AS SHOWN BY CONSTRUCTION NO(S). ____
SEE UL ROOFING MATERIALS AND SYSTEMS DIRECTORY
Control No.

+ 15, 30, 60 or 90

* * * * * * * * * * * * * * * * * * * * * * * * *

UL, in performing its functions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any other party. UL shall not incur any obligation or liability for any loss, expense or damages, including incidental or consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon this Guide Information.

Plastic, Foamed
Last Updated on 2013-05-16
TJBX.GuideInfo TJBX Active 20130516 20100303

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2019 UL LLC".