UL PRODUCT CATEGORY

Prefabricated Buildings, QRAR


Guide Information for Building Materials

These are factory-built buildings, structures, and building assemblies incorporating pre-installed materials and equipment which, after installation, are usually concealed and may not be accessible for inspection at the installation site.

They are intended for installation subject to approval by the Authority Having Jurisdiction.

The buildings, structures, and building assemblies have been investigated in accordance with one or more Model Codes (such as Building, Fire, Plumbing, Mechanical, Gas, Energy) and the National Electrical Code and/or a State Code and/or an applicable Building Code of the local jurisdiction. As an alternate, the building, structure, and building assemblies have been investigated in accordance with one or more specific areas of a code such as electrical, plumbing, mechanical, structural, etc.

When the Building Code does not include specific requirements for such features as air cooling and heating systems, fuel supply systems, chimney and venting systems, etc., the applicable requirements of the National Fire Codes are used.

* * * * * * * * * * * * * * * * * * * * * * * * *

UL, in performing its functions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any other party. UL shall not incur any obligation or liability for any loss, expense or damages, including incidental or consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon this Guide Information.

Last Updated on 2000-06-07
QRAR.GuideInfo QRAR Active 20000607 20000607

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2019 UL LLC".