UL PRODUCT CATEGORY

Prefabricated Assemblies, QQRX


Guide Information for Electrical Equipment for Use in Ordinary Locations

Guide Information for Plumbing and Associated Products

This category covers prefabricated assemblies, which are factory-built assemblies incorporating pre-installed materials and equipment which, after installation, are usually concealed and may not be accessible for inspection at the installation site.

Materials, including the methods used for the installation of electrical, mechanical, heating and plumbing equipment incorporated in these assemblies by their manufacturer, have been judged under the requirements of UL, which are based on ANSI/NFPA 70, "National Electrical Code," and model fire, building, plumbing and mechanical codes.

Authorities Having Jurisdiction should be consulted before installation.

* * * * * * * * * * * * * * * * * * * * * * * * *

UL, in performing its functions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any other party. UL shall not incur any obligation or liability for any loss, expense or damages, including incidental or consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon this Guide Information.

Last Updated on 2008-05-02
QQRX.GuideInfo QQRX Active 20080502 20080502

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2019 UL LLC".