UL PRODUCT CATEGORY

[Emergency Lighting and Power Equipment] Emergency Light-emitting-diode Drivers, FTBV


See General Information for Emergency Lighting and Power Equipment

USE AND INSTALLATION

This category covers light-emitting-diode (LED) drivers with rechargeable battery packs, intended for field or factory installation in or with luminaires specifically identified either on the product or in the manufacturer's instructions. The battery pack-luminaire combination provides 90 minutes (or more, if so marked) of illumination sufficient to meet the illuminance performance requirements of NFPA 101, "Life Safety Code," and is eligible to serve as part of a facility's emergency lighting system in accordance with NFPA 101, Article 700 of NFPA 70, "National Electrical Code," and the "International Building Code."

These emergency LED drivers are suitable for installation inside or outside the luminaire housing, as noted in the installation instructions.

RATINGS

All products have been investigated for use in dry locations only unless marked as suitable for damp or wet locations. Products marked as suitable for indoor damp or wet locations have not been investigated for UV exposure. All products have been investigated for use in ambient temperatures of 20 - 30°C (68 - 86°F) unless otherwise marked with an extended-use temperature range.

Emergency LED drivers marked as having Class 2 outputs are eligible for field connection in accordance with Article 725 of the NEC.

When an emergency LED driver covered under this category is included in a certified LED luminaire retrofit kit (see Light-emitting-diode Luminaire Retrofit Kits (IFAR)), the resulting converted luminaire is also eligible to serve as part of a facility's emergency lighting system in accordance with the Codes referenced above.

PRODUCT IDENTITY

One of the following product identities appears on the product:

    Emer. Light & Power Eq.

    Emer. Light Eq.

    Emer. Power Eq.

    Emergency LED Driver

    Emergency Lighting and Power Equipment

    Emergency Lighting Equipment

    Emergency Power Equipment

RELATED PRODUCTS

Emergency battery packs for use with fluorescent luminaires are covered under Emergency Lighting and Power Equipment (FTBR).

See Light-emitting-diode Luminaire Retrofit Kits (IFAR).

ADDITIONAL INFORMATION

For additional information, see Emergency Lighting and Power Equipment (FTBR), Electrical Equipment for Use in Ordinary Locations (AALZ) and Building Materials (AABM).

REQUIREMENTS

The basic standard used to investigate products in this category is UL 924, "Emergency Lighting and Power Equipment,"

UL MARK

The Certification Mark of UL on the product is the only method provided by UL to identify products manufactured under its Certification and Follow-Up Service. The Certification Mark for these products includes the UL symbol, the words "CERTIFIED" and "SAFETY," the geographic identifier(s), and a file number.

Additional Certification Markings

Products covered under this category are additionally marked with the following information:

FOR USE WITH [manufacturer/model number] LED LUMINAIRE

or

FOR USE WITH LED LUMINAIRES
IDENTIFIED IN THE MANUFACTURER'S INSTALLATION INSTRUCTIONS

Alternate UL Mark

The Listing Mark of UL on the product is the only method provided by UL to identify products manufactured under its Listing and Follow-Up Service. The Listing Mark for these products includes the UL symbol (as illustrated in the Introduction of this Directory) together with the word "LISTED," a control number, the product name "Emergency LED Driver," "Emergency Lighting Equipment" (or "Emer. Light Eq."), "Emergency Power Equipment" (or "Emer. Power Eq.") or "Emergency Lighting and Power Equipment" (or "Emer. Light & Power Eq."), and the statement "For Use with [Manufacturer/Model number] LED Luminaire" or "For Use with LED Luminaires Identified in the Manufacturer's Installation Instructions."

Alternate UL Mark

The Classification Mark of UL on the product is the only method provided by UL to identify products manufactured under its Classification and Follow-Up Service. The Classification Mark for these products includes the UL symbol, the word "CLASSIFIED" above the UL symbol (as illustrated in the Introduction of this Directory), and the following additional information:


+
FOR USE WITH *
Control No.

+ EMERGENCY LED DRIVER, EMERGENCY LIGHTING EQUIPMENT (or EMER. LIGHT EQ.), EMERGENCY POWER EQUIPMENT (or EMER. POWER EQ.) or EMERGENCY LIGHTING AND POWER EQUIPMENT (or EMER. LIGHT & POWER EQ.)

* [Manufacturer/Model number] LED LUMINAIRE or LED LUMINAIRES IDENTIFIED IN THE MANUFACTURER'S INSTALLATION INSTRUCTIONS

* * * * * * * * * * * * * * * * * * * * * * * * *

UL, in performing its functions in accordance with its objectives, does not assume or undertake to discharge any responsibility of the manufacturer or any other party. UL shall not incur any obligation or liability for any loss, expense or damages, including incidental or consequential damages, arising out of or in connection with the use, interpretation of, or reliance upon this Guide Information.

Emer. Light & Power Eq.Emer. Light Eq.Emer. Power Eq.Emergency BallastsEmergency LED DriversEmergency Lighting and Power EquipmentEmergency Lighting EquipmentEmergency LuminairesEmergency Power EquipmentEmergency Power System AccessoriesInverter/Charger PacksLED Drivers, Emergency
Last Updated on 2017-02-08
FTBV.GuideInfo FTBV Active 20170208 20170208

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2019 UL LLC".