UL PRODUCT CATEGORY

Gypsum Board


See General Information for Gypsum Board

CABOT MANUFACTURING ULCR25370
221 Henry Paint St
Point Tupper, NS B9A 1Y8 CANADA

5/8 in. thick, 4 ft. wide, Type X for use in Design Nos. G501, G520, G531, L501, N501, N502, N505, U017, U301, U302, U305, U309, U321, U326, U329, U330, U332, U337, U338, U339, U341, U342, U351, U354, U355, U356, U357, U358, U360, U364, U369, U379, U405, U411, U418, U420, U421, U425, U434, U442, U449, U450, U460, U465, U466, U467, U473, U475, U477, U487, U494, U501, U502, U504, U505, U506, U510, U512, U531, U609, U615, U617, U622, U623, U626, U633, U637, U646, U647, U648, U651, U652, V304, V314, V332, V417, V419, V420, V421, V430, V432, V434, V463, W452, X508, X516, X517, X525, X526, X528.

1/2 in. thick, 4 ft wide, Type C for use in Design Nos. G502, G504, G515, G523, G524, G526, G527, G528, G529, G530, G531, G533, G534, L502, L503, L504, L507, L510, L512, L514, L524, L525, L530, L542, L587, P237, P510, P512, U312, U317, U320, U406, U410, U412, U426, U428, U429, U435, U436, U438, U440, U441, U443, U444, U448, U451, U452, U453, U454, U455, U467, U474, U478, U529, U608, U620, U910, U912, U914, V418, X507, X513, X514, X515, X518, X520, X521, X522, X523, X524, X530, X531.

5/8 in. thick, 46 to 54 in. wide, "5/8 Type X" for use in Design Nos. G501, G503, G505, 5/8 in. thick, 46 to 54 in. wide, Type X for use in Design Nos. G501, G503, G505, G507, G508, G531, L501, L508, L532, L556, L591, N501, N502, N505, P508, P510, P511, P517, P540, P541, U017, U026, U207, U208, U301, U302, U305, U309, U321, U326, U329, U330, U337, U338, U339, U341, U342, U344, U351, U354, U355, U356, U357, U358, U360, U364, U369, U379, U411, U418, U420, U421, U425, U434, U436, U439, U442, U445, U449, U450, U460, U465, U466, U467, U469, U473, U485, U487, U494, U502, U504, U505, U506, U510, U512, U609, U615, U617, U622, U637, V304, V310, V417, V419, V421, V431, V463, X508, X510, X516, X517, X525, X526, X527, X528.

5/8 in. thick, 4 ft wide, Moisture Resistant Type X, Gypsum Sheathing Type X, Mold & Mildew Resistant Type X and Mold & Mildew Resistant AR Type X for use in Design Nos. U301, U305, U342, U354, U355, U379, V304, V310, V332.

5/8 in. thick, 46 to 54 in. wide, Moisture Resistant Type X, Gypsum Sheathing Type X, Mold & Mildew Resistant Type X and Mold & Mildew Resistant AR Type X for use in Design Nos. U301, U305, U354, U379, V310, V314.

5/8 in. thick, 48 in. wide, Type Blueglass Exterior Sheathing for use in Design Nos. G501, G503, G505, G507, G508, G520, G531, L501, L508, L532, L556, L591, N501, N502, N505, P225, P227, P727, P230, P235, P250, P254, P259, P266, P302, P508, P510, P516, P517, P540, P541, P745, P747, P749, P751, P811, P829, U017, U026, U032, U040, U204, U207, U208, U301, U302, U305, U309, U321, U326, U329, U330, U332, U337, U338, U339, U341, U342, U344, U351, U354, U355, U356, U357, U358, U360, U364, U369, U374, U379, U411, U418, U420, U421, U425, U434, U436, U439, U442, U445, U449, U450, U460, U465, U466, U467, U469, U473, U475, U485, U487, U494, U495, U502, U504, U505, U506, U510, U512, U609, U615, U617, U622, U623, U626, U633, U637, U646, U647, U648, U651, U652, U926, V304, V310, V314, V332, V417, V419, V420, V421, V430, V431, V432, V434, V435, V463, W452, X508, X510, X516, X517, X525, X526, X527, X528, X538, X602.

Last Updated on 2019-07-01
CKNX.R25370 R25370 CKNX 100562937 LISTING Active 20190701 20190701

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product.

UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "© 2019 UL LLC".